Products Center

Products for Filtration, Separation, Sifting and Printing

Dust Collector Filter Bags

How to buy

To order or inquire about our products, please contact us or send us an inquiry

Introduction:

Bag type dust collecting systems generally fall into one of the following categories:

  1. Pulse Jet or Plenum Pulse cleaning systems
  2. Shaker or Reverse Flow cleaning systems

ln Pulse Jet and Plenum Pulse systems, the dust is collected on the outside of the filter bag and the clean air exits through the inside of the bag. The bag is supported by a wire cage to prevent the bag from collapsing during operation.

In a 'Top Load' system, the bags and cages are installed from the clean air side of the cell plate while with 'Bottom Load' they are installed from the dirty air/hopper side of the unit.

Pulse-Type Filter Bags

  1. Sewn-in Circular Disc Base
  2. Sewn-in Circular Disc Base with Bumper Cuff Reinforcement
  3. Snap Band Top to Fit
  4. Flange Top with Wire Ring
  5. Plain Open Top
  6. Open Top with Cuff and Cord

ln Shaker and Reverse-Air cleaning systems the dust is collected on the inside of the filter bag. Since the bag is inflated with the air/dust stream, support cages are not required. The filtered air exits through the outside surface of the bags. Many configurations are available to suit the needs of most dust collectors.

Shaker-Type Filter Bags

  1. Strap Top
  2. Loop Top
  3. Open Top with Cuff and Cord
  4. Compression Band Top with Cap
  5. Grommet Top
  6. Sewn-In Wire Hanger Top
  7. Snap-band with Grooved Profile to Fit Cell-Plate Hole
  8. Snap-band with Flat Felt to Fit Wheelabrator Style Cell-Plate

Suit all styles of dust & fume filters and are specifically designed to withstand high temperatures and chemicalĀ attack.

Applications:

  • Original Equipment Manufacturers
  • Power/Co-Generation
  • Minerals
  • Process Chemicals
  • Plastics
  • Food & Pharmaceutical
  • Aluminum
  • Carbon Black
  • Asphalt Hot Mix
  • Remediation
  • Metals
  • Steel

Request a Quote